Fire Alarm Inspection Software Guide - Coming Soon

This guide explains what fire alarm inspection software needs to support NFPA 72 work. FireInspected currently supports NFPA 10 portable fire extinguisher workflows; NFPA 72 support is planned.

What an NFPA 72 fire alarm workflow needs

NFPA 72 (National Fire Alarm and Signaling Code) work typically requires device-level inspection records, test results, qualified personnel, and reports aligned with the adopted code and AHJ requirements. FireInspected does not currently provide these forms or reports.

Initiating device testing

• Smoke detector sensitivity testing - Record sensitivity readings and compare against manufacturer specifications per NFPA 72 Chapter 14
• Manual pull station operation checks - Verify activation, reset, and proper signal transmission to the panel
• Heat detector testing - Rate-of-rise and fixed-temperature detector verification with calibrated test equipment
• Duct detector testing - Smoke entry, airflow, and alarm verification for HVAC duct detectors

Notification appliance testing

• Horn/strobe audibility and visibility checks - Verify sound pressure levels and strobe coverage per NFPA 72 requirements
• Voice evacuation system testing - Intelligibility testing and message verification
• Battery and power supply testing - Load testing, charger verification, and runtime calculations

Control panel and system testing

• Control unit functional testing - Verify all circuits, zones, and annunciation
• Supervisory signal testing - Tamper switches, valve supervision, and trouble signal verification
• Off-premises signal transmission - Verify signals reach the monitoring station or central station

FireInspected product status

FireInspected currently focuses on NFPA 10 extinguisher inspections. NFPA 72 forms, device tracking, and alarm reporting are planned rather than available today. Join the waitlist if you want updates about future fire alarm workflows.